Just open up a terminal window and enter the following:
defaults write com.apple.mail PreferPlainText -bool TRUE

To return back to normal, just enter the same thing, but set it to FALSE.

So what next…

I’m not sure if what I did and what I am about to tell you next is the correct way to deal with the situation, but I guess in a few days we’ll see if I’m the proud owner of a worthless hunk of aluminum.

Step 1

Tilt the laptop so the moisture drains away from where the logic board is. The board is approximately located towards the back and extends down to about where the space bar is. It starts on the left side and ends about where O and P keys are.

Step 2

Unplug and power down as quickly as you can. The faster you do this, the more likely you are save your system from getting fried. Don’t worry about shutting down your system properly at this point. You’ll probably survive that, it’s the hardware we’re worried about. So – press and hold that power button until the screen goes black.

Step 3

Set your laptop on top of something absorbent like a towel, and get some air moving. Heat is probably a bad idea, so it’s probably best to just use a fan. Remove the back cover to expose the components inside. There are 10 screws holding the back plate on. It is probably a good idea at this point to find a small container to place all of your screws in, so you avoid losing them.

Step 4

Warning the next step will void your warranty.

Remove your battery from the system. Apple, being the jackasses they are, use special screws to hold the battery in place. After a trip to RadioShack, the MacStore and my local hardware store I found that nobody carries the correct screw driver for this. However, I found that my cheapo precision screwdriver set has a flat head 2.4mm one that will work anyway.

Make sure your warranty isn't important to you before proceeding!

Step 5

Dry up any excess moisture you can. And keep that fan running

Mmmm. Coffee...

Step 6

Finally, and most importantly, DO NOT give in to the temptation of putting things back together and firing up your laptop before it’s had a chance to completely dry out. If you do, you might fry something (if it isn’t already). I plan on leaving my as is for a few days just to make sure.

Gratuitous nerdy shot. Hey, I thought it looked neat and was curious how well my macro settings worked on my Cannon XSi Rebel.

Anyway – I’m sitting in my office listening to music and realized that the speakers, while okay for what they are, suck by most standards. So I pop over to my PC and fire up iTunes, hit play, and use my sound system that’s hooked up to it. Sounds great. But, I’m lazy and I got tired of switching over to it change tracks, stop, pause, etc. I figured there had to be a way to control iTunes remotely from the Mac. Doing a bit of research, I found some stuff for the Mac and a PHP script that did me no good.

Finally I came across a Perl script (can’t remember where…) that simply runs a Daemon. Everything that I needed was already there! All I needed to do, was point a browser at the box and it had a nice simple stripped down interface for play, pause, stop, next, etc…

After some time, I realized I hated having to keep the browser window open. Enter MacOS dashboard widgets.

After some quick fiddling with Dashcode, I came up with this little dashboard widget to send the requests to the PC. The current track name only updates after a command is sent, so it isn’t updated dynamically.

Now my iTunes controls are at my fingertips, and I don’t have to spend the time moving my hands the whole 24 some inches to the right to do it on the PC.

So how do you serve gzipped js files?

There a few methods out there. I chose the one below since it was fast, easy and I’m hella freakin’ lazy.

The first step is to gzip all of the javascript files that you might be serving up. The fastest way I found was to just telnet into the server, and execute the following bash command:

gzip -cr <javascript directory>

Of course you’ll need to replace <javascript directory> with the correct directory that your javascript files are located in. The -c option tells gzip to keep the originals. This is important so that you can still serve non gzipped versions to browsers that don’t handle gzip! The -r option tells it to recurse through the directory. Now you should have a directory full of javascript files and their gzipped counterparts.

init.js
init.js.gz
jquery-ui.js
jquery-ui.js.gz
jquery.easing.js
jquery.easing.js.gz
jquery.history.js
jquery.history.js.gz
jquery.js
jquery.js.gz
swfobject.js
swfobject.js.gz

Yay. How exiciting, no?

The next step is to modify .htaccess to do some URL rewriting.

AddEncoding gzip .gz
RewriteCond %{HTTP:Accept-encoding} gzip
RewriteCond %{HTTP_USER_AGENT} !Safari
RewriteCond %{REQUEST_FILENAME}.gz -f
RewriteRule ^(.*)$ $1.gz [QSA,L]

Essentially your telling the web server to server up gzip files, if the browser accepts them and the user is not on Safari and if there is a compressed version of the file available.

That’s really about it.

Here’s the difference in file sizes:

Pretty significant size difference!

Since the dimensions of the interface have been reduced to fit in this blog post, things might be a bit small (try zooming in). You can also drag nodes around. Helpful when things get pushed off the screen. Nodes can be opened and closed by clicking on them.

One day, your computer will be a big-ass table…

Centennial License Manager is a web-based software license compliance solution that helps you quickly reconcile license entitlement to software usage on your network. Not only can it help your licensing position, it can help you save money as well by showing instances where you may be over licensed.

For more details, visit the License Manager products page at Centennial Software.

The virus deletes systems files, modifies the registry to block attempts to undo the damage and takes control of Windows text reader. It is spread through peer-to-peer networks, external storage devices and malicious Web sites.

You can read more about the virus from their Web site and you can hear a sample of the voice here.